Using the New Strap
From FlySight
Videos
We have published videos showing two methods of using the strap. First, you can install the strap with no additional tools using this method:
Alternatively, if you have difficulty using that method, you can install the strap using a pull-up cord:
Instructions
Before installing the strap, always check the rubber loop for signs of wear. If the rubber loop is worn, do not use the mount, and replace the strap immediately.
Hold the strap as shown below.
Pull the rubber loop over the FlySight.
Grasp the plastic button through the rubber loop.
Flip the plastic button over the loop.
Pinch the sides of the loop together.
